AQUEOUS DISPERSION PRIMER BASED ON STYRENE-ACRYLIC COPOLYMERS.
FEATURES
Label: Aqueous phase
Flash point Viscosity at delivery: 10 Poise
Appearance of the film after drying: Satin, Velvety
Product density: 1.45 +- 0.01
Dry extract or concentration of active ingredients: 61% +- 1
Resistivity Product appearance upon delivery: Fluid, dense, white
Coverage: 200 g/m²
Opacifying power: Excellent
Storage: 12 months away from frost
NF EN 71-3 standard: Yes
Water thinner
APPLICATIONS
Quick-drying, pneumatic spray gun and pump, brushes, rollers, paintbrushes, gloves.
DOMAINE D'EMPLOI ET PARTICULARITE
Mainly applied to wood and wood derivatives. It provides excellent protection and can be left as is or covered with a toy-standard varnish or other finish (please consult us). The primer has a short dust-free time and quick film hardening. Ideal for improving the appearance and feel of your surfaces.
Saves several coats of lacquer and creates a deep effect. Micro-breathable, the primer is suitable for most surfaces. If you have any cleaning problems, please contact us.
DRYING: At 20°C -
At a rate of 200 to 300 g/m²
DUST-FREE 15 mins
CURING TIME 1 to 2 hours depending on application
FINAL HARDENING 3 to 4 hours
HANDLABLE 20 minutes depending on room temperature
RECOVERABLE 3 to 4 hours
OBSERVATIONS PARTICULIERES
The ambient temperature and the temperature of the substrates, as well as the ventilation conditions, influence drying and hardening. Do not use at temperatures below 15°C or above 35°C.
RECOMMANDATIONS DE SECURITE
Do not ingest. Do not inhale. Aspiration or ventilation in accordance with occupational health and safety standards. Do not discharge into drains. Waste must be collected and disposed of by an approved waste disposal company. Non-flammable product. For further details, see our safety data sheet.