ALKYDE URETHANE GLOSSY, SATINE AND MATTE VARNISH
Etiquette See F.D.S
Flashpoint - 21 degrees C
Delivery viscosity 60" CF No. 4
Appearance of film after drying Satin, shiny and matte
Product Density 0.900 - 0.01
Dry extract or concentration of materials 50% - 1
Product appearance at Transparent or opalescent delivery
Power covering 6 to 8 M2 L
Void clouding power
AFNOR Cup No. 4
Standards NF 71 3 Yes
Storage 12 Months
Diluant No. 18 or W.S.
Fast soaked, pneumatic pistol and airmix pump, brushes, cod tail, spalters.
EMPLOYMENT AREA AND PARTICULARITE:
Mainly on wood, all essences and medium, as well as plywood, ferrous metal.
CLYPSOL has the advantage of being goodly resistant to shocks and humidity.
Excellent garnishing power, allows to get beautiful and soft surfaces. It can be
applied to normal traffic flooring. Ideal for yachting, cottage, rattan, frizz,
table and chair. The outdoor outfit is excellent.
SECHAGE A 20 C HORS POUSSIERES: 45 to 90 minutes
PONCABLE: Satin and Mat only - 12 p.m. (not for glossy varnish).
HARDENING: 48 hours
MANIPULABLE: 90 minutes to 120 minutes depending on the temperature of the room (Mini 15 max 35 degrees)
The ambient temperature, the temperature of the items and the ventilation conditions influence the
drying and hardening. Do not use at a temperature of less than 15oC and above 35oC.
(see security data sheet) Do not ingest. Do not inhale. Aspiration or ventilation
compliance with labour inspection standards. Do not throw it down in the sewer. Waste must be
be collected and handed over to an approved skills destruction company. Means of extinction:
Co 2 fire extinguisher, powder, water and foam. Flammable product. For more details see our information
The information contained in this fact sheet is based on our experience, but does not
may be a guarantee if used defectively. We absolve ourselves of any responsibility
problems resulting from the product mix without our notice.