Average glycerophthalic paint in high-strength finishing oil.
Apply to the outside or indoors on wood, healthy, dry and clean ferrous metals. Plastic.
Delivery viscosity 60'' CF 4 to 20 C
Appearance of film after drying satin
Product Density 1,135 - 0.05
Dry extract or concentration of materials 63% - 1
Product appearance at fluid delivery, creamy
Power covering 5 to 7 m2 depending on application / kg
Excellent cloudy power following shade
TOy standard EN71.3
Storage 12 months away from frost
Pneumatic pistol and pump, brush, rollers, brushes, gloves.
EMPLOYMENT AREA AND PARTICULARITE
Outdoor and indoor application. Mainly on wood, plaster, paper, materials
porous, can also be applied to metals, provided the support is treated against corrosion.
Gives excellent protection from the weather.
Forms a soft and durable film, which allows it to be leachable.
Applying on central heating radiator, can be applied on some plastics and composites, a pre-test is highly recommended.
SECHAGE A 20 C - At the rate of application of 150 to 200 g/m2
HORS POUSSIERES 50 minutes
DURCISSEMENT 5 to 8 a.m.
RECOUVRABLE 12 p.m.
The ambient temperature, the temperature of the supports and the ventilation conditions influence the drying and hardening.
Do not use at a temperature below 15 degrees Celsius and above 35 degrees Celsius. Do not inhale. Aspiration or ventilation in accordance with labour inspection standards. Do not throw it down in the sewer. Waste must be collected and handed over to an approved skills destruction company. Flammable product. For more details see security data sheet. ____________________________________________________________
The information contained in this fact sheet is based on our experience, but cannot be a guarantee in the event of defective use. We absolve ourselves of any liability for problems arising from the blending of products without our notice.