Gb
Français
Magnetic Blackboard Paint
Alkyde Resin Base - Matte Black
⚠️ Warning: This paint is not toy-grade
Quality and features
- Special high-quality alkyd resin-based paint
- Allows magnets to adhere
- Allows writing with chalk
- Excellent adhesion to surfaces
- Scratch and impact resistant
- Resistant to cleaning products
- Excellent covering power
- Matte black color
Instructions for use
- Surfaces to be treated must be clean, dry and grease-free.
- Remove old coats of paint and sand until the surface is completely smooth.
- Apply an undercoat of DUPLI-COLOR primer if necessary (highly absorbent substrates).
- Shake can for 2 minutes before use and test on a sample.
- Optimum distance: 15 to 20 cm.
- Then spray paint on the desired object.
- For optimum magnetic effect on the blackboard, apply a minimum of five coats of paint, allowing around 10 minutes drying time between coats.
- During application, shake the can from time to time.
- Turn the can after use and empty the valve for cleaning.
- After 48 hours, the paint is dry and the painting is ready for use.
Physical and chemical characteristics
| Binder base | Alkyd resin |
| Color | Black |
| Odor | Solvent odor |
| Gloss | Matte at 60° angle to DIN 67530 |
| Heat resistance | Up to 80°C |
| Packaging / Capacity | Aerosol can, maximum nominal volume 500 ml |
Coverage :
- 500 ml can covers an area of 1.8 to 2.0 m² (single coat)
- For a magnetic effect on chalkboards: 500 ml covers approx. 0.5 to 0.6 m²
- The heavier the magnets, the greater the number of coats required
Drying (at 20°C, 50% relative humidity):
- Dust dry: after approx. 30-60 minutes
- Touch-dry: after 2-3 hours
- Cured: after 48 hours
Drying time depends on ambient temperature, relative humidity and thickness of coat applied.
Shelf life / Storage: 10 years with proper storage (=10°C - 25°C, max. 60% relative humidity)