Gb
Français
Technical information
Acrylac Decor lacquer
Identification: Acrylac Décor
Waterborne lacquer based on a high-end acrylic and polyurethane resin complex with added lightfast pigment.
Complies with toy standard EN 71-3.
Features
| Film appearance after drying | Satin or gloss on request |
| Product density | 1 ± 0.05 |
| Delivery viscosity | Not applicable |
| Dry extract or material concentration | 47 % |
| Product appearance on delivery | Dense, slightly thixotropic |
| Coverage | 150 g/m2 |
| Opacifying power | Depending on color |
| Toy standard EN 71-3 | Yes |
| Storage | 12 months frost-free |
| Thinner | Water |
Applications
Spray gun, airmix, pneumatic, spalter, brush, dip.
Areas of use and special features
The main advantage of lacquer is that it is non-flammable and odorless. It can be used in the same way as a solvent-based lacquer, with the difference that on some wood species, a slight lifting of fibers may occur. It can also be applied to any porous surface (slate, brick, etc.).
Mainly used on toys and decorative items. The addition of water-based polyurethane resins gives the deposited film enhanced resistance to chemical and mechanical aggression. Lacquer has good filling power, but with certain colors, notably yellow, it's advisable to apply a white primer, which will enhance the visual and tactile appearance of your surfaces and reduce the number of coats of lacquer required. This provides superior coverage, enabling you to hide certain wood defects such as knots, dark veins, stains, etc. All application utensils must be thoroughly cleaned and rinsed with water before drying, as the quality of the resins used means that the lacquer does not become soggy or stripped after drying. In the event of cleaning problems, please consult us.
Technical drying data
| Dust-free drying at 20°C | 15 min |
| Can be sanded | 60 min |
| Time between 2 coats | 45 min |
| Final hardening | 12 h |
Special notes
Ambient temperature, substrate temperature and ventilation conditions influence drying and curing. Do not use at temperatures below 15°C and above 35°C.
⚠️ Safety recommendations
(see safety data sheet) Do not ingest. Do not inhale. Vacuum or ventilate in accordance with the standards of the Labour Inspectorate. Do not discharge into drains. Waste must be collected and handed over to an authorized waste disposal company. Non-flammable product. For further details, see our safety data sheet.
The information contained in this data sheet is given on the basis of our experience, but cannot constitute a guarantee in the event of faulty use. We accept no responsibility for problems arising from mixing products without our advice.