Technical sheet of the toy standard exterior varnish

Technical Information

Alkyde Urethane Gloss, Satin and Matt Varnishes

Specifications

Label	See F.D.S
Flash point	< 21° C
Delivery viscosity	60 " CF N° 4
Film appearance after drying	Satin, gloss and matte
Product density	0.900 ± 0.01
Dry Extract	50 % ± 1
Product appearance on delivery	Transparent or opalescent
Coverage	6 to 8 M² / L
Opacifying power	None
AFNOR cut	N° 4
NF 71-3 standards	Yes
Storage	12 months
Thinner	N° 18 or W.S

Applications

Quick dip, pneumatic gun and airmix pump, brushes, cod tail, spalters.

Area of use and special features

Mainly on wood, all species and mediums, as well as plywood and ferrous metals.

CLYPSOL offers good resistance to impact and humidity.

Excellent filling power, for beautiful, smooth surfaces. Can be applied to normal traffic parquet. Ideal for yachting, cottages, rattan, frisette, tables and chairs. Excellent outdoor resistance.

Technical drying data

Dust-free drying at 20° C	45 to 90 min
Sanding	Satin & Matt only + 12 h (not for gloss varnish)
Sanding	Manual
Hardening	48 h
Time between 2 coats	12h to 48 h
Handling	90 to 120 min. depending on room temperature (min. 15° max. 35°)

Special notes

Ambient temperature, product temperature and ventilation conditions influence drying and curing. Do not use at temperatures below 15°C and above 35°C.

⚠️ Safety recommendations

(see safety data sheet) Do not ingest. Do not inhale. Vacuum or ventilate in accordance with the standards of the Labour Inspectorate. Do not discharge into drains. Waste must be collected and handed over to an authorized waste disposal company. Extinguishing media: Co 2 extinguisher, powder, water and foam. Flammable product. For further details see our safety data sheet.

The information contained in this data sheet is given on the basis of our experience, but cannot constitute a guarantee in the event of faulty use. We accept no responsibility for problems arising from mixing products without our advice.